Contact person: Frank Dai Tel: +86-311-80741253 Fax: +86-311-80741253 Mobile: +86-15130063344 E-mail: frank@chancsmachine.com Add: 3-1414, Lecheng Business Plaza, No. 260 Huai'an West Road,
Products
Chain Grade Thermal Oil Boiler
YLL-type thermal oil boiler is easy to install, as long as connect upper body and the lower combustion chamber together, the installation will be finished. The whole cycle is short.Heat surface with close-packed disk, heating surface layout sufficient to reduce the thermal load on the pipe surface, the use of thermal oil is more secure.Media flow is reasonable, thermal oil from low (import) to high (export), the gas generated during operation is difficult to stay in the furnace, can be easily discharged in the system.Fuel in the combustion chamber for absolute combustion, the fuel can make it easier to fire, burn more fully and improve the thermal efficiency of the boiler.Close arrangement of the coil on the top of the boiler, can better protect the roof, to avoid the phenomenon of the top of the furnace burnout.
Main features of CHANCSMAC thermal oil boiler: 1.Product design, manufacturing, testing in strict accordance with the <<Boiler Safety Technology Supervision Regulations>> GB / T17410-2008<<organic heat carrier furnace>>standards and the implementation of regulations, meanwhile inspected by state special equipment safety agencies, safe and reliable
2.The heating surface of the boiler is fully welded with argon arc welding, and is subjected to X-ray inspection. The pressure test in the hydraulic test is qualified to ensure the welding quality higher than the national standard. 3. Adopting our unique and patented technology, the top coil is set on the top of the furnace, and both sides of the furnace tube are heated, which prolongs the residence time of the high temperature flue gas in the furnace, and has high heat utilization rate and prolongs the service life of the boiler. 4. Feeding automatic and inverter control technology is optional, which can reduce operators to one person for operation. 5. Mechanical compulsory combustion and dedicated arch design is applied for wood industry to make sure fuel full combustion, less smoke and dust producing and good environmental effects. Boiler safe and convenient, the overall investment is less, cost-effective
Security features and the main control points of CHANCSMAC thermal oil boiler: 1. Thermal oil outlet temperature display: Can be displayed on site and transmitted to the control cabinet by the instrument display, the user can set the temperature value, and can be interlocked with the fan to achieve automatic adjustment operation, and high temperature alarm 2 . Thermal oil inlet temperature display: can be displayed on-site and transmitted to the control cabinet by the instrument display 3. Thermal oil outlet pressure display: can be displayed on site and transmitted to the control cabinet as far as instrumentation, and to achieve over-pressure alarm 4. Thermal oil inlet pressure display: the scene can be displayed and transmitted to the control cabinet by the instrument display 5. Expansion tank level control: to achieve the expansion tank level alarm, timely remind stove staff to add the system oil, to ensure the safe and reliable operation of the boiler system 6. Grate running speed knob control and display, according to the actual situation at any time to adjust.
Model
YLL-240MA
YLL-350MA
YLL-500MA
YLL-700MA
YLL-1000MA
YLL-1200MA
YLL-1400MA
YLL-2000MA
Heating supply
*104KCal
20
30
40
60
80
100
120
160
Rated Power (KW)
240
350
500
700
1000
1200
1400
2000
Thermal efficiency %
≥73
Design pressure MPa
1.1
Max. Operating temperature℃
340
Medium circulating capacity m3/h
20
30
40
60
80
100
100
160
Diameter of main pipe DN
50
65
65
100
100
125
125
150
Diameter of main pipe DN(mm)
Installed power KW
15.9
18.35
18.35
25.9
31.5
43.45
43.45
62.75
Fuel
Coal, waste wood
Coal consumption Kg/h(Take coal heat value as 6000Kcal/㎏)